01 / MMS
Solar Module Mounting Structure
Custom-engineered for optimal wind resistance and load-bearing capacity. Available in Hot Dip Galvanized Iron (HDGI), Galvalume and aluminium alloy.
Home/Products
Product Portfolio & Technical Data
Every component, tailored to your site.
A comprehensive range of mounting structures, profiles and accessories. Final specifications are always project and drawing dependent.
Our Product Portfolio
Structures, profiles and hardware.
02 / Bracket
Z Brackets
High-strength Z-shape mounting for secure, low-height setups. Ideal for space-constrained rooftops — efficient, easy to mount, with zinc coating engineered for a 25+ year lifespan.
03 / Rail
Rail Tracks — Mono & Long
Continuous rail support for metal sheet and large commercial roofs. Clean aesthetics, minimal roof penetration, fewer mounting points — faster installation and less roof stress.
04 / Profiles
Custom Bending & Profiles
C, U and L sections manufactured to exact client specification. Thickness and width capability customized to support both lightweight and heavy-duty applications.
05 / Base
Base Plate with C-Section
A robust square base plate seamlessly integrated with a vertical C-section. Pre-drilled mounting holes ensure rapid anchoring and secure structural alignment.
06 / Hardware
MMS Accessories
Fasteners, L-angles, C-channels, Z-purlins, U-channels, clamps, brackets, strips, plates and customized hardware — supplied per drawing and specification.
FastenersL-AnglesC-Channels
Z-PurlinsU-ChannelsClamps
BracketsStrips & PlatesMid & End Clamps
Self-Drilling ScrewsCustomized Hardware
Product Data
Typical supply range.
Final specifications are project and drawing dependent — the table below shows the typical form each component takes and how it is selected.
| Component | Typical Form | Selection Basis |
|---|---|---|
| Columns | C-sections / formed sections / project-specific profiles | Thickness and grade as per structural design |
| Rafters | C-sections / formed sections / angles or project-specific profiles | Selected for span, loading and connection requirements |
| Purlins | C / Z / hat-type or project-specific profiles | Profile and thickness based on module layout and loading |
| Bracing | Angles, flats, channels or formed members | Configured for lateral stability and load transfer |
| Module Rails / Supports | Aluminium or steel support components | Compatible with module frame and clamping system |
| Fasteners | Bolts, nuts, washers, self-drilling screws and special fasteners | Grade and coating selected as per project specification |
Raw Material Options
The right steel for the environment.
Carbon and structural steel grades and thicknesses are selected according to engineering calculations and customer drawings.
- GI / galvanized steel for corrosion-protected structural components.
- Hot-dip galvanized (HDG) where enhanced corrosion protection is specified.
- ZAM-coated steel where zinc-aluminium-magnesium coating is called for.
- Galvalume for high-durability formed sections.
- Aluminium for rooftop rails and lightweight components.
- Stainless steel for fasteners and components needing higher corrosion resistance.
Finish & Protection
Coated to last the plant's life.
Typical options include HDG, zinc plating, pre-galvanized / ZAM coating and powder coating where applicable.
Hot Dip GalvanizingZinc Plating
Pre-GalvanizedZAM CoatingPowder Coating
Quality Principle
Only approved drawings and specifications govern final dimensions, material grade, coating requirements and acceptance criteria. Final coating system, thickness and inspection criteria follow the approved project specification.
Specification FAQ
Questions we get before a quotation.
Module make, model and dimensions; the quantity or plant capacity; whether it is rooftop or ground-mounted; the site location (for wind zone and terrain category); and any layout drawing or roof plan you already have. If you have a specification document, send it — we design to it.
Yes. Special-purpose structures, extensions, walkway supports and non-standard assemblies are routinely developed directly from customer drawings. We also customize sections, dimensions, connections and accessories to suit an existing design.
Coastal and high-humidity environments generally call for hot-dip galvanizing or ZAM coating, with stainless steel for exposed fasteners. The final coating system, thickness and inspection criteria should follow the approved project specification — we will recommend an option and confirm it against your spec.
Both. We support component-wise supply — purlins, brackets, rails, clamps, fasteners — as well as complete mounting-structure packages for a full plant scope.
Design is customized as per wind speed, terrain category and load conditions at your location. Our engineering team performs structural design and load analysis in structural steel, and sections are optimised so the structure is strong without being over-specified.
Pan-India, dispatched from our facility at Mira Industrial, Lindiad, Surat. Material is packed and identified project-wise so it arrives ready to sort on site.
Built Strong. Built To Last.
Get a bill of materials for your plant.
Send us the layout and specification — we'll come back with sections, quantities and pricing.